The proven PE series jaw crusher is designed to crush efficiently all, even hardest rock and recycle materials. DSMAC jaw crusher is designed for long life service with minimum maintenance for hard, tough, abrasive material and overload high capacity.
PE Jaw Crusher is suitable for
1. Primary and secondary crushing
2. Compression strength is no more than 320Mpa
3. Any demanded crushing application
4. Hardest rock and recycle materials
Robust and Assembly Design
DSMAC PE series crusher is premium class crushers due to their design as well as to the materials that are used to produce them, so as to ensure the highest possible functionality and reliability, without any compromises. Each model is tested virtually for stress, strain, shock, deformation, thermal loading, vibration and noise under a wide range of load conditions. The result is exceptional reliability.
| Type | Maximum Feed
(mm) |
CSS(mm) | Production Capacity(t/h) | Motor Power
(kw) |
Weight
(excluding motor) (t) |
| PE250*400 | 210 | 20-80 | 10-20 | 15 | 2.8 |
| PE400*600 | 340 | 35-90 | 30-60 | 30 | 6.5 |
| PE500*750 | 425 | 50-100 | 60-110 | 45-55 | 12 |
| PE600*900 | 480 | 65-160 | 110-180 | 55-75 | 17 |
| PE750*1060 | 630 | 80-140 | 190-320 | 90-110 | 29 |
| PE900*1200 | 750 | 95-165 | 320-450 | 110-132 | 58 |
| PE1000*1200 | 850 | 200-300 | 450-560 | 110-160 | 69 |
| PE1200*1500 | 1020 | 150-300 | 550-800 | 160-220 | 95 |
| PE1500*1800 | 1200 | 210-360 | 800-1050 | 280 | 130 |
| PEX750*150 | 120 | 15-45 | 10-16 | 15 | 3.5 |
| PEX750*250 | 210 | 18-55 | 10-22 | 22 | 4.9 |
| PEX1000*250 | 210 | 20-60 | 17-40 | 37 | 7.0 |
| PEX1200*250 | 210 | 20-60 | 30-50 | 45 | 7.7 |
| PEX1300*300 | 250 | 20-90 | 35-80 | 75 | 11.6 |
